Opto Engineering® - 20 years
主页 光源 LTCLHP 系列
LTCLHP016-R
参数
文件和下载
兼容产品
照明规格
光束直径 (mm) 20
工作距离范围 (mm) 35 - 70
光源颜色,峰值波长 (1) red, 625 nm
光谱半高宽 (nm) 20
电气规格
电源电压 (2) (V) 12-24
最大功耗 (W) 2.5
LED 正向电压典型值(最大值) (3) (V) 2.4 (3)
最大 LED 正向电流 (4) (mA) 350
最大脉冲电流 (5) (mA) 2000
连接器 M8
电缆线 CB244P1500 included
机械规格
长度 (6) (mm) 99.9
前部直径 (mm) 37.7
重量 (g) 191
环境指标
工作温度 (°C) 0-40
存储温度 (°C) 0-50
工作相对湿度 (%) 20-85, non condensing
安装 Indoor use only
眼睛安全
根据风险组 CEI EN 62471:2010 Exempt

最后更新 22 4月 2025

CE
ROHS
REACH
WEEE
UKCA

注释

  1. Opto Engineering®推荐在高精度测量应用中使用绿光。
  2. 公差±10%。
  3. 在最大正向电流下。正向电压测量公差为± 0.06V。
  4. 在连续(非脉冲)模式下使用。
  5. 在脉冲宽度<= 10 ms、占空比<= 10%的条件下。必须绕过内置电路板(请参见技术信息)。
  6. 标称数值,无垫片。
为提高可靠性、功能性、设计或其他方面,所有产品规格及数据如有改动,恕不另行通知。照片和图片仅供说明之用。

技术文档

Product user guide
LTCLHP manual

数据表

下载数据表

布局文件

DXF
IGS
PDF
STEP
SLDPRT
尽管已经全力制作制作了无错误的兼容性清单,但我们始终建议您在购买产品之前咨询 Opto Engineering® 技术支持部门其相容性。Opto Engineering® 不承担其任何相关责任。
CMBS series
CMBS series
45° beam splitters
CMBS016
45° beam splitter with mount for 37.7 mm clamping diameter optics
CPDPH01
Diffuser cap for telecentric illuminators, diffusive diameter 2.8 mm
CPDPH02
Diffuser cap for telecentric illuminators, diffusive diameter 0.8 mm
CPDPH03
Diffuser cap for telecentric illuminators, diffusive diameter 5.0 mm
CPDPH04
Diffuser cap for telecentric illuminators, diffusive diameter 12.0 mm
CMHO016
Clamping mechanics for TCxx016 lenses and LTCLHP016-X illuminators
LTSCHP1W-R
Replacement LED module, red
LTDV1CH-17V
Strobe controller 1 channel variable current 5 mA - 17A
LTDVE1CH-40F
LED Strobe controller 1 channel, 40A pulsed - 4A continuous, fast version
LTIC1CH-A1-4
Analogue lighting controller unit, 4A, 24V
LTIC1CH-D1-4
Digital lighting controller unit, 4A, 24V
LED1W-R
Replacement LED source, red, 625 nm
CB244P1500
Power cable, side 1 M8 connector straight, side 2 cable end - 2 m - type 1 labels
CB244P1500L
Power cable, side 1 M8 connector angled, side 2 cable end - 2 m - type 1 labels
需要报价
将此产品添加到报价需求列表中。