LTSCHP 模块为多个 Opto Engineering® 照明器供电，具有优异的电流稳定性。
这些模块有多种颜色可供选择，且可作为零配件订购：
1W 电源:
• LTSCHP1W 模块与 LTCLHP、LTLCHP CORE（仅红色、绿色和白色)、LTCL4K、TCCXQ、TCCX、TCBENCH 系列、TCBENCH CORE、MZMT12X 系列和 TCKIT 工具箱兼容。
• 新型 LTSCCP1W-G 绿色光源与 LTLHP CORE PLUS 系列兼容。
• 现在还可提供新型 LTSCHP1W-GZ 绿色光源：适用于任何样品，并可针对测量反射物体和具有清晰边缘的物体进行特殊定制。事实上，它会减少边缘衍射效应，还可确保优异的照明均匀性（尤其是针对大视场)，并减弱整个系统对校准的敏感度。它与 LTCLHP、TCBENCH、LTCL4K、LTCLHP CORE、TCBENCH CORE 系列和 TCKIT 工具箱兼容。
3W 电源：
• LTSCHP3W 模块与 LTPRHP3W 和 LTPRSMHP3W 图案投影仪兼容。
注释
- 公差±10%。
- 在最大正向电流下。正向电压测量公差为± 0.06V。
- 在连续（非脉冲）模式下使用。
- 在脉冲宽度<= 10 ms、占空比<= 10%的条件下。必须绕过内置电路板（请参见技术信息）。
Instructions for use
Operation options
LTSCHP LED modules can be operated in two ways:
- standard usage option: through the built-in electronics
- direct LED control usage option
STANDARD usage option (LED control throuh built-in electronics)
Only continuous mode (constant voltage) is allowed.
Connection:
Connect the black and the brown cables to your +12 / +24 V power supply.
Light intensity adjustment
The built-in multi-turn trimmer allows to control the light (LED forward current) intensity with a very high degree of precision: you can bring the current intensity from minimum to maximum with 21 full turns of the adjustment screw. Simply remove the protective cap and rotate counter-clockwise the adjustment screw to increase light intensity and vice versa.
Direct LED control usage option
Both continuous and pulsed mode are allowed; the built-in electronics can be bypassed in order to drive the LED directly for use in continuous or pulsed mode. When bypassed, builtin electronics behaves as an open circuit allowing direct control of the LED source. Please note that in such case light intensity adjustment is not possible though the built-in multi-turn trimmer.
Connection:
Connect the black and blue cables as shown below (remove the LED anode protective cover).
Make sure not to exceed LEDs maximum rates to avoid electrical shorts.
